Auto, Circ 5 fresh on, Save energy button – LOCKSTATE LS-90 Operation Guide User Manual
Page 17: Fan control
PG
16
PG
16
Save Energy Button
The “Save Energy” feature on the LS-90 provides a simple, easy-
to-use way to help you manage your energy use. SAVE ENERGY
automatically adjusts your target temperature up [in COOL] or
down [in HEAT] by a saved value degrees (four degrees is the
default).
-To use Save Energy, simply press Save Energy button in the
upper left corner of the unit
- The screen will now read “Save Energy Δ 4°and the Target
Temperature will adjust by that offset. Use the +/- buttons to change
the offset. Range 2°-9°F [1°-5°C]
- To return to normal operation, press the “Save Energy” button
again, and the TARGET TEMP will return to the programmed temperature.
FAN control
To view the fan status, touch the FAN icon located at the top center of the HOME screen.
AUTO: The fan control is normally set to AUTO mode, meaning that the fan operates automatically,
only when the HVAC system is also running.
CIRC: The CIRC function allows your fan to automatically circulate air for
up to nine minutes per hour for better indoor air quality and efficiency.
FRESH:
If your HVAC system has a fresh air baffle, touch FRESH to use
fresh air with HVAC. This works with AUTO or ON. The fresh air baffle must
be connected to the EX terminal on the LS-90.
SAVE
ENERGY
HVAC
STATUS
MENU
NORMAL
$0.05 KWA
Power Status Normal $.05/kWh
HEAT
12:30pm
5/25 WED
TARGET
77
o
TEMP
HUMID
23
%
FAN
o
F
FAN
control
SAVE
ENERGY
AUTO
CIRC 5
FRESH ON
HVAC
STATUS