Reese 33021 PROFESSIONAL RECEIVER - Manual (Page 2)

For Installation Assistance or Technical Help, Call 1-574-537-6993
Reese warrants its Hitches, custom Hitch Receivers, and Sway Controls from date of purchase against defects in material and workmanship under normal use and
service, ordinary wear and excepted, for the ownership life of the original consumer purchaser. Reese will replace FREE OF CHARGE any part which proves defective in
material or workmanship when presented to any Reese dealer, Reese Warehouse or return to factory. TRANSPORTATION CHARGES PREPAID, at the address
below. THIS WARRANTY IS LIMITED TO DEFECTIVE PARTS REPLACEMENT ONLY. LABOR CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION OR
REPLACEMENT AS WELL AS INCIDENTAL AND CONSEQUENTIAL DAMAGES CONNECTED THEREWITH ARE EXCLUDED. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any damage to the Hitch, Custom Hitch receiver
or Sway Control as a result of misuse, abuse, neglect, accident, improper installation, or any use violative of instructions furnished by us, WILL VOID THE WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. In the event of a problem
Reese warrants its Hitches, Custom Hitch Receivers and Sway Controls from date of purchase against defects in material and workmanship under normal use and
service, ordinary wear and tear excepted, for the ownership life of the original consumer purchaser.
with warranty service or performance, you may be able to go to a small claims court, a state court, or a federal district court.
Towing Products
PO Box 8102
47774 Anchor Ct.
Plymouth, MI 48170 Towing Products
475 Wyecroft Road
Oakville, Ontario
Canada L6K2H2
33021IN-20NOV02 PCN6132 © 2002 TOWING PRODUCTS Litho in USA
LIMITED WARRANTY
THIS PRODUCT COMPLIES WITH SAFETY SPECIFICATION AND REQUIREMENTS FOR THE STATE OF NEW YORK AND VESC REGULATION V-5 FOR CONNECTING DEVICES AND
TOWING SYSTEMS. WEIGHT DISTRIBUTING HITCH RATING IS 6000 LB. MAX. GROSS TRAILER WEIGHT AND 600 LB. MAX. TONGUE WEIGHT. WEIGHT CARRYING HITCH RATING IS
4000 LB MAX GROSS TRAILER WEIGHT AND 400 LB MAX TONGUE WEIGHT. CONSULT VEHICLE OWNERS MANUAL FOR TOWING RECOMMENDATIONS AND LIMITATIONS.
3/4” BOLT
3/4” NUT
3/4” LOCK WASHER
3/4” FLAT WASHER
1/2” FLAT WASHER
1/2” LOCK WASHER
12MM NUT
1/2” FLAT WASHER
12MM BOLT
95-98 VEHICLES
NOTE: You may have to loosen the bumper brackets and spread them apart to get the hitch installed if the
holes don’t line up. There are five bolts per bumper bracket.
1. Spare tire may need to be loosened for hitch installation.
2. Lift the hitch up along the outside of the frame. Insert the 3/4” hex head bolts with flat washers through the
side of the frame. Install 3/4” flat washers, lock washers, and nuts on the bolts. SEE DIAGRAM ABOVE.
3. Insert 12mm bolts with flat washers through the remaining holes. Install flat washer, lock washers, and
nuts on the bolts. SEE DIAGRAM ABOVE.
4.Tighten the bolts evenly so the hitch remains centered on the vehicle.
5. Torque the 3/4” nuts to 200 ft*lb.
Torque the 12mm nuts to 75 ft*lb.
6. Retighten spare tire and bumper if they were loosened.