Reese 30144 18K ELITE SERIES - Manual (Page 6)

ELITE SERIES
FIFTH WHEEL ASSEMBLY
TOOLS
15/16" Socket & Open End Wrench
Safety Glasses
200 lb ft T W h Whit Lithi G & Wh l G 200 lb-ft Torque Wrench White Lithium Grease & Wheel Grease
3/4” & 1-1/2” Box or End Wrenches 9/16” Socket or Open End Wrench
3/4” Socket 7/16” Socket or Open End Wrench
Tape Measure
1. Check all the boxes for all the components
listed in Figure 1 and become familiar with
component terminology component terminology.
2. Loosely assemble the two slider assemblies
to the center section using 5/8-11 bolts and
lock washers
NOTE A: Hole positions used in assembly
will need to be made based on the head
height measurements taken previously,
calculated height closest to one of the
d
Center Section
Ears
Hitch Height
DO NOT USE
15.75”
17 00”
Front of Truck
following height dimensions: 15.75” (2 nd
holes down), 17.0” ( 3 rd holes down ),
18.25” ( bottom holes ).
DO NOT USE THE TOP HOLE.
See Figure 9 .
NOTE B: The ears on the center section
should be offset forward, if clearances allow.
See Figure 10 . See mounting rail installation
instructions for your specific vehicle
17.00”
18.25”
instructions for your specific vehicle.
3. Tighten 5/8” bolts in the center section to
170 ft-lbs.
Slider Assemblies
Figure 9
FORWARD OFFSET
REARWARD OFFSET
30144N– 05JUL10A PCN13292 ©2010 CEQUENT PERFORMANCE PRODUCTS, INC. Litho in USA 6
For Kit 30144
Figure 10