Reese 30852 RAIL KIT - Manual (Page 9)

10. From inside the truck bed, attach pucks (2) and trim rings (4) to rails (1) using button head screw (8) and lock
washer (9) (
Figure 14 ). Tighten to 110ft.lbs. torque.
WARNING:
DO NOT lubricate threads. It may cause bolt failure.
Figure 14
8
9 9
2
3
Truck Bed
Puck Assembly
4
11. Insert puck plugs (2) (as shown) whenever pucks are not in use. ( Figure 15 )
12 Install REESE ® Elit ™ S ri fifth wheel per hitch assembly instructions
Figure 15
30852IN – 16FEB11A PCN14335 ©2011 CEQUENT PERFORMANCE PRODUCTS, INC. LITHO IN USA
9
12. Install REESE ® Elite Series fifth wheel per hitch assembly instructions.
13. Make sure all 1/2" bolts are torqued to 75 ft. lbs., 5/8” bolts are torqued to 110 ft. lbs, and bed bolts are torqued
to 75 ft. lbs.
14. Re-attach ground wire.