Reese 56009 OUTBOARD CUSTOM QUICK INSTALL KIT - Manual

© 2013 Cequent Performance Products, Inc.
Rev. A 56009N 09/17/2013
ITEM DESCRIPTION QUANTITY ITEM DESCRIPTION QUANTITY
1 DRIVER SIDE FRONT BRACKET 1 7 PASSENGER SIDE REAR BRACKET 1
2 DRIVER SIDE REAR BRACKET 1 8 BUSHING 2.773" 2
3 PASSAGER SIDE FRONT BRACKET 1
4 CONICAL WASHER 1/2" 8
5 BOLT, 1/2"-13X4.500" GR8 2
6 BOLT, M12 - 40MM - 1.5" 10.9 8
Vehicle Forward
Figure 1
Installation Instructions
REESE ® CUSTOM QUICK INSTALL MOUNTING KIT
FOR 30153 REESE ® RAILS ONLY
2014 Dodge Ram 2500
Part Number:
56009
WARNING:
Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity.
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
REESE ® Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame.
10 BOLT INSTALLATION
All Fasteners
Typical Both Sides
All of the fasteners listed to
the left are supplied with this
kit, all other mentioned
fasteners are supplied with
part number 30153.
1
Equipment Required:
Fastener Kit: 56009F
Wrenches: 3/4”, 18mm
Drill Bits: 1/8”, 9/16” & 1 1/4” Hole saw
Other Tools: Center Punch, Measuring Tape