Maintenance, Changing the filter-drier – Robinair 342000 Refrigerant Service Solution User Manual

Page 27

Advertising
background image

25

342000 Refrigerant Service Solution

CHANGING THE FILTER-DRIER

The filter-drier is specially blended to remove maximum moisture, acid and
other contaminants. It will recycle about 300 pounds (136.36 kgs) of refriger-
ant before a replacement is needed. The unit keeps track of jobs and total
recycled refrigerant, and signals when it’s time to change the filter-drier.

If the CHANGE FILTER message comes on during a job, it’s best to complete
that job before changing the filter-drier. FILTER CHANGE will show on the
display until the filter has been replaced.

Maintenance

INST0719

Filter

CAUTION! The filter change process should not be done with the

unit connected to the vehicle. Disconnect the unit by closing the
service coupler valves and disconnecting the high and low side
hoses from the vehicle.

Use the following steps to change the filter:

1. Select MAIN MENU, then press SCROLL MENU.

2. Press the FILTER CHANGE function key.

3. Press the START key. The unit will run to clear the filter-drier.

Advertising