Ronan X11CA Software Manual - Manual (Page 10)

Rev 1.3 Series X11CA Computer Annunciators: X11CA Configuration Software User’s Manual
3. X11CA Installation and Un-installation
Hardware Control-© 2003 Ronan Engineering 6
If you want to change the directory, click on the Change Directory
button to select a destination directory as shown in Figure 3-3
When you are ready to continue the installation, click on the installation
icon button in the middle of the window to continue the installation.
If you do not want the installation at this time, click on the Exit Setup
button at the bottom of the window to stop the installation.
Figure 3-3
X11CA
Setup
Window
9) The next window is the X11CA Choose Program Group window
(Figure 3-4) where you can set the program name to be displayed in the
Programs menu. The default name is ‘X11CA’, but you can either set a
new name or choose one from the list of the program names. Press the
Continue button to continue with the installation.
Figure 3-4. X11CA-
Choose Program Group