Ronan X96S LEVEL GAGE - Manual (Page 16)

12
ITEM FUNCTION
Analog Bar Shows the current state of the analog bar display (enabled or disabled) and allows the
user change the state.
Line 1: Shows the data to be displayed on line 1 of the status display and allows the user to
change the selection
Line 2: Shows the data to be displayed on line 2 of the status display and allows the user to
change the selection
Line 3: Shows the data to be displayed on line 3 of the status display and allows the user to
change the selection
Line 4: Shows the data to be displayed on line 4 of the status display and allows the user to
change the selection
Line 5: Shows the data to be displayed on line 5 of the status display and allows the user to
change the selection
Line 6: Shows the data to be displayed on line 6 of the status display and allows the user to
change the selection
Line 7: Shows the data to be displayed on line 7 of the status display and allows the user to
change the selection
Line 8: Shows the data to be displayed on line 8 of the status display and allows the user to
change the selection
Each line may each select one of the following:
SELECTION MEANING
Level Level
Head Temp Head temperature (if available)
4-20 mA 4-20 mA output level
Raw Raw counts (from scintillation detector) or raw analog measurement (from ionization
detector
Date & Time Current date and time
Not Assigned Blank line
Configuration Menu
The Variables menu is used to access area configuration menus. It contains the following items:
ITEM FUNCTION
Operation Selecting this choice takes the user to the Operation menu
Level Config Selecting this choice takes the user to the Level Config menu
Head Temp Config Selecting this choice takes the user to the Head Temp Config menu
Alarms Selecting this choice takes the user to the Alarm menu
Hardware Selecting this choice takes the user to the Hardware menu
HART Selecting this choice takes the user to the HART menu
System Selecting this choice takes the user to the System menu
Operation Menu
The Operation menu is used to access the menus and variables that control the processing of the level data. It contains the
following items: