Salamander Designs Synergy System SLW40C/B - Manual (Page 3)

3
Rear Panels
©2005 Salamander Designs Ltd. Doc. #500-960 v 8.05 / 3 of 3
Slide the perforated steel side panels down
the outer posts.
4
Side Panels
Place metal spacer tabs on top of the 2 (Triple), 3 (Quad)
rear, center posts.
Secure the top panel in place using the connector bolts
and 3/16” hex key.
Press caplugs into the top and bottom of center holes to
complete installation.
INSTALLING
FLAT-PANEL TV MOUNT
Refer to PM300 Wall Mount
Assembly Instructions before
proceeding to step 6.
5
Top Panel
- Bolts
Tabs -
- Caplugs
Slide the rear panels down the rear posts.
Place rear panel with grommet in the center.
Attach Grommet to rear panel.
Grommet
! !