Adder Technology AdderView CATx 1000 User Manual
Page 48
USB Country Code
Some computers query the keyboard to find
out its country code and key layout. These
computers use this information to configure
the way that they interpret the data coming
from the keyboard and so it is important for
the correct country information to be supplied.
Not all keyboards report country information
and two different styles of keyboard may be
connected to the AdderView CATx 1000.
Default Country
The codes that may be used within this option are as follows:
Country
Code
Country
Code
Arabic
01
Persian (Farsi)
20
Belgian
02
Poland
21
Canadian-Bilingual
03
Portugese
22
Canadian-French
04
Russian
23
Czech Republic
05
Slovakian
24
Danish
06
Spanish
25
Finnish
07
Swedish
26
French
08
Swiss/French
27
German
09
Swiss/German
28
Greek
10
Switzerland
29
Hebrew
11
Taiwan
30
Hungary
12
Turkish-Q
31
International (ISO)
13
UK
32
Italian
14
US
33
Japan (Katakana)
15
Yugoslavia
34
Korean
16
Turkish-F
35
Latin American
17
Reserved
36-255
Netherlands
18
Not supported
00
Norwegian
19
ADDERVIEW CATx 1000
USB Country Code
Country Code
AUTO
Default Country
32
Space-Toggle
-Up -Down
Esc-Quit
Country Code
Settings: AUTO, MANUAL, DISABLED
In AUTO mode the AdderView CATx 1000 will attempt to query the keyboard
attached to the local port to ascertain a country code. If a country code is not
found then the AdderView CATx 1000 will use the current value of the Default
Country option. In MANUAL mode, the connected local keyboard is not queried
for country information and instead the Default Country value is reported to
all computers that request country information. In DISABLED mode, no country
information is supplied to computers requesting country information.
To get here
1 From a local or remote keyboard, log on
as a standard (limited options) or ‘admin’
user.
2 Press
(hotkeys can change).
3 Press to select ‘More menus’.
4 Press again to select ‘Advanced
menus’.
5 Highlight the USB Country Code option
and press Enter.
6 Select ‘Setup Options’.