SecurityMan AVLCD - Manual (Page 16)

16
Alarm Setup
The camera provides either Heat-detection or Voice-detection alarm. You
can change alarm method via the alarm setting switch.
Alarm Setting Switch
Alarm Indicator
Snooze Button on Receiver
The receiver provides alarm beep when the camera detect motion or
noise, and alarm beep will last 9 seconds. You could press the “SNOOZE”
button on the receiver to temporarily stop the alarm from beeping for 30
seconds before it comes back on.
Note: if you want to completely turn off the
alarm beep, set the alarm setting switch on the camera to” OFF”.
CH1 CH2 CH3
SNOOZE CHANNEL
SNOOZE
Alarm
Indicator
Green
The alarm indicator will light green when
you select “PIR Motion Sensor” or when
the camera detected the body motion.
Red
The alarm indicator will light red when you
select “Audio Sensor” or when the camera
detected noise.
PIR Motion Sensor
Camera will be set as Heat-detection alarm
Audio Sensor
Camera will be set as Voice-detection alarm
OFF
Camera will set as no alarm function
PIR Motion
Sensor
Audio
Sensor
OFF
Default Setting
PIR Motion
Sensor
Audio
Sensor
OFF