SecurityMan AVLCD - Manual (Page 18)

Channel Set:
You can confirm which channel is set to receive signal from correspon-
ding camera. (Note: This channel set mode is recommended for channel
setting on the receiver than channel switch.)
Channel-Scan Set:
The Channel-Scan function support multi-camera usage. When the cam-
era turn on, all available channels will display one by one looping in turn
per 5 second. So that you can watch the situation from up to 3 different
cameras via one receiver.
Alarm Set :
You can set the switch to “Alarm OFF” to disable the beeping function of
receiver when you do not need it.
Night Vision
The built-in 8 Infra-red lights in camera provide night vision for 24hrs sur-
veillance. The Infra-red lights will be automatically activated in dark night
or places without light in about 10ft range. The picture will turn to Black &
White (monochrome) in Night Vision status.
Built-in IR lights for about
10ft Night Vision Range
18