SecurityMan AVWatch - Manual (Page 17)

17
Mode Control Setup
The receiver can support up to 3 cameras working at the same time. You
can adjust the mode control to set the working status as described
below. The mode control has the highest priority.
ON
OFF ALARM ON
ALARM OFF
1
1- ON: CH1 Enable (Default)
OFF: CH1 Disable
2- ON: CH2 Enable (Default)
OFF: CH2 Disable
3- ON: CH3 Enable (Default)
OFF: CH3 Disable
2 3 L
Channel Set
L- ON: Channel-Scan Enable
OFF: Channel-Scan Disable (Default)
Channel-Scan Set
ON
OFF ALARM ON
ALARM OFF
1 2 3 L
Alarm ON: Alarm beep Enable (Default)
Alarm OFF: Alarm beep Disable
Alarm Set
ON
OFF ALARM ON
ALARM OFF
1 2 3 L
DC8V
A/V OUT
ON
OFF ALARM ON
ALARM OFF
1 2 3 L
Mode
Control
ON
OFF ALARM ON
ALARM OFF
1 2 3 L
Default Setting