SecurityMan AVWatch - Manual (Page 18)

Channel Set:
You can confirm which channel is set to receive signal from correspon-
ding camera. (Note: This channel set mode is recommended for channel
setting on the receiver than channel switch.)
Channel-Scan Set:
The Channel-Scan function support multi-camera usage. When the cam-
era turn on, all available channels will display one by one looping in turn
per 5 second. So that you can watch the situation from up to 3 different
cameras via one receiver.
Alarm Set
You can set the switch to “Alarm OFF” to disable the beeping function of
receiver when you do not need it.
Night Vision
The built-in 8 Infra-red lights in camera provide night vision for 24hrs sur-
veillance. The Infra-red lights will be automatically activated in dark night
or places without light in about 10ft range. The picture will turn to Black &
White (monochrome) in Night Vision status.
Built-in IR lights for about
10ft Night Vision Range
18