SecurityMan DVR-04 - Manual (Page 14)

6.1 Start Recording
Press “ Record” to start recording. System will display some information on screen.
Only EACH MODE can enlarge single channel to full screen display
• 1 Hard Disk Percentage Used
• 2 “ R ” Recording Symbol
• 3 Channel Numbers
• 4 Mode (QUAD or EACH)
• 5 Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)
• 6 HDD Info. ([M] Master disk [S] Slave disk)
• 7 (M) Motion Triggered, (T) Continuous, (S) Sensor, ( ) No Record
• 8 When “*” show up beside date & time, it indicates system HDD overwrite.
6.2 Stop Recording
Press “ Stop” and system will prompt to input password. Only the correct password can stop the
recording process.
14 Record