SecurityMan DVR-04 - Manual (Page 17)

17
8.1 Install
1. Put the USB Driver Program CD in your CD-ROM
2. Go to the CD-ROM and execute “setup.exe”
3. Use default destination folder
4. Execute: start>Program>DVR Play
Note: This software currently supports Windows 2000 and Windows XP!
8.2 Program Interface
Run the program (double click “ ” icon on desktop). Your computer system will detect the HDD
automatically when it recognizes the USB cable from the DVR to its USB port.
*Notice: if the HDD cannot be detected because of unsuitable operation, please try the following
steps:
(1) close the USB program window, and remove the USB cable from the DVR.
(2) reconnect the USB cable to the DVR, wait for 5 seconds, and open the DVR Play software
again.
if step 1 and step 2 do not work,
(3) restart the computer and repeat step 2.
USB Programming