SilverStone SG05 Power supply - Manual (Page 5)

Issued Date: 2009-January-19
Copyright © 2009 SilverStone Technology Co., Ltd. All Rights Reserved
5
4.4.OUTPUT RISE TIME
(10% TO 95% OF FINAL OUTPUT VALUE, @FULL LOAD)
115V-rms or 230V-rms + 3.3Vdc : 20ms Maximum
+ 5Vdc : 20ms Maximum
+ 12Vdc : 20ms Maximum
+ 5Vsb : 25ms Maximum
- 12Vdc : 20ms Maximum
4.5.OVER VOLTAGE PROTECTION
Voltage Source Protection Point
+3.3V 3.76V-4.5V
+5V 5.6V-7.0V
+12V 13.0V-16.5V
4.6.OVER-CURRENT PROTECTION
OUTPUT VOLTAGE Max. overcurrent limit
+3.3V 60A
+5V 48A
+12V1 DC 25A
+12V2 DC 30A
4.7.SHORT CIRCUIT PROTECTION
Output short circuit is defined to be a short circuit load of less than 0.1 ohm.
In the event of an output short circuit condition on +3.3V, +5V or +12V output, the power supply
will shutdown and latch off without damage to the power supply. The power supply shall return to
normal operation after the short circuit has been removed and the power switch has been turned off
for no more than 2 seconds.
4.8. POWER SIGNAL
POWER GOOD @ 115/230V,FULL LOAD 100 –500mSec.
POWER FAIL @115/230V, FULL LOAD 1 mSec. minimum