SilverStone ST60F-ESB - Manual (Page 7)

STRIDER ESSENTIAL SERIES
06
5. Start Stability
5.1 No Load Start
When power is applied to ST70F-ESB and ST60F-ESB with no load connected
or under minimum load connected, neither damage to power supply nor hazards
to users will occur.
5.2 Cold Start
The power supply shall operate properly when first applied at normal input
voltage and or so maximum load after 4 hours storage in 0
℃ environment.
6. Environments
6.1 Temperature and Humidity
6.1.1 Operating
Temperature
0 to 40
℃
Relative Humidity 20 to 90 %
6.1.2 Storage
Temperature -40 to 70
℃
Relative Humidity 20 to 95 % noncondensing
6.2 Altitude
The power supply can operate normally at any altitude between 0 to 10000 feet.
6.3Vibration and Shock
Sweep and resonance search for each of X,Y,Z, axis at the sweep.
RATE of 1/OCTAVE/Min.
Frequency Duration Amplitude
5-55-10 Hz 30 minutes 0.35 mm
7. Conducted EMI
CE , FCC
8. Product Safety
8.1 Safety Requirement
TUV, CUS , CB
8.2 Leakage Current
The AC leakage current is less than 3.5mA when the power supply connect
to 253Vac/50Hz.