3 delay config, 4 channel balance and channel test, 5 input config – Adcom GTP-860II User Manual

Page 25

Advertising
background image

| ADCOM GTP-860

II Owner’s Manual

24

25

ADCOM GTP-860

II Owner’s Manual |

3.3 Delay Config

For the best surround sound perfor-
mance it is important that sound
from all speakers reach the listener’s
ears at the same time. Because the
surround/rear speakers are usually
closer to the listener than the front
speakers, there is a tendency for the
ear to localize sounds to the rear,
because the ear gives precedence to
the sounds that arrive at the head
first. Similarly, the center speaker is
often closer to the listener than the
front left and right speakers. To com-
pensate for this, the GTP-860

II can

slightly delay the audio sent to the
center and rear (closer) speakers. In
this way, when playing Dolby Digital
or Dolby Pro Logic sound tracks, the
sound from all speakers arrives uni-
formly at the listening position as
intended by the film’s producer.

To configure the channel delays,
measure or estimate the distance
for each of the speakers to the main
listening location. The GTP-860

II

will automatically configure the cor-
rect settings for processing. Note,
the information can be input in
either feet or meters by selecting the
desired unit in the DELAY UNIT field.

3.4 Channel Balance and

Channel Test

The output levels of each of the
speakers connected to the GTP-860

II

may need to be adjusted so that
there is an even balance of sound
from all the speakers in the system.
If, for instance, the relative volume
level of the front left and right speak-
ers is too high relative to the center
speaker, dialog may be difficult to
understand. If on the other hand,
the center speaker is set too loud, all
sound will seem to be coming from
only the center channel speaker.

The best method for setting the
channel balance is to use a sound
pressure level meter (available from
Radio Shack) and the built-in test
tone generator in the GTP-860

II. To

access the test tone, navigate to the
channel test page on the OSD. Be car-
ful to lower the master volume level
first because the test tone signal
can be very loud. The noise signal
will be heard from the speaker that
is currently selected. By navigating
through the speakers and monitor-
ing the sound level on the meter,
the level adjust for each speaker can
be determined. It is best to keep
the sound level meter at the most
central listeing seat for these adjust-
ments. Note that the tone color of
the noise coming from the subwoofer
will be different than from the other
speakers; this is due to the limited
frequency response of a subwoofer.
Due to limititions of most sound-level
meters it is best to adjust the sub-
woofer level while listening to music.

If you wish to adjust the channel lev-
els without using the test tone, then
select the Channel Balance menu
or push the bal [40] button on the
remote. Note that only speakers that
you selected in the speaker configura-
tion menu will be available.

3.5 Input Config

The input configuration menu allows
you to configure the audio input for
each of the source buttons and to
set a default surround mode for each
source.

The source selection allows you to
select which of the input buttons you
wish to configure.

The input section is used to determine
what audio input the source will use.
The options are the analog stereo input
associated with the source or to over-
ride the analog input and use one of
the six digital inputs.

The ext. 5.1 section allows you to
select the 6 channel audio input usu-
ally associated with a DVD audio or
SACD player for the source button you
are configuring.

SETUP MAIN MENU

INPUT CONFIG

SPEAKER CONFIG

DELAY CONFIG

CHANNEL BALANCE

CHANNEL TEST

PROLOGIC II SETUP

EXIT WITH SAVE

EXIT WITHOUT SAVE

DELAY CONFIG

FRONT L/R DIS: 10ft

CENTER DIS: 8ft

SURROUND DIS: 5ft

DELAY UNIT:

FEET

RETURN TO SETUP

INPUT CONFIG

SOURCE: VIDEO 2

INPUT: OPTICAL2

EXT 5.1: OFF

MODE: DOLBY D

RETURN TO SETUP

PROLOGIC II SETUP

CENTER WIDTH:

3

DIMENSION:

0

RETURN TO SETUP

CHANNEL BALANCE

LEFT:

0dB

CENTER:

3dB

RIGHT:

0dB

REAR R :

0dB

BACK R :

0dB

BACK L :

0dB

REAR L :

0dB

SUB:

0dB

RETURN TO SETUP

SPEAKER CONFIG

FRONT:

SMALL

CENTER:

SMALL

SURROUNDS: SMALL

SURR BACKS: YES

SUBWOOFER: YES

RETURN TO SETUP

CHANNEL TEST

LEFT:

0dB

CENTER:

1dB

RIGHT:

0dB

REAR R :

0dB

BACK R :

0dB

BACK L :

0dB

REAR L :

0dB

SUB:

0dB

RETURN TO SETUP

SETUP MAIN MENU

INPUT CONFIG

SPEAKER CONFIG

DELAY CONFIG

CHANNEL BALANCE

CHANNEL TEST

PROLOGIC II SETUP

EXIT WITH SAVE

EXIT WITHOUT SAVE

DELAY CONFIG

FRONT L/R DIS: 10ft

CENTER DIS: 8ft

SURROUND DIS: 5ft

DELAY UNIT:

FEET

RETURN TO SETUP

INPUT CONFIG

SOURCE: VIDEO 2

INPUT: OPTICAL2

EXT 5.1: OFF

MODE: DOLBY D

RETURN TO SETUP

PROLOGIC II SETUP

CENTER WIDTH:

3

DIMENSION:

0

RETURN TO SETUP

CHANNEL BALANCE

LEFT:

0dB

CENTER:

3dB

RIGHT:

0dB

REAR R :

0dB

BACK R :

0dB

BACK L :

0dB

REAR L :

0dB

SUB:

0dB

RETURN TO SETUP

SPEAKER CONFIG

FRONT:

SMALL

CENTER:

SMALL

SURROUNDS: SMALL

SURR BACKS: YES

SUBWOOFER: YES

RETURN TO SETUP

CHANNEL TEST

LEFT:

0dB

CENTER:

1dB

RIGHT:

0dB

REAR R :

0dB

BACK R :

0dB

BACK L :

0dB

REAR L :

0dB

SUB:

0dB

RETURN TO SETUP

SETUP MAIN MENU

INPUT CONFIG

SPEAKER CONFIG

DELAY CONFIG

CHANNEL BALANCE

CHANNEL TEST

PROLOGIC II SETUP

EXIT WITH SAVE

EXIT WITHOUT SAVE

DELAY CONFIG

FRONT L/R DIS: 10ft

CENTER DIS: 8ft

SURROUND DIS: 5ft

DELAY UNIT:

FEET

RETURN TO SETUP

INPUT CONFIG

SOURCE: VIDEO 2

INPUT: OPTICAL2

EXT 5.1: OFF

MODE: DOLBY D

RETURN TO SETUP

PROLOGIC II SETUP

CENTER WIDTH:

3

DIMENSION:

0

RETURN TO SETUP

CHANNEL BALANCE

LEFT:

0dB

CENTER:

3dB

RIGHT:

0dB

REAR R :

0dB

BACK R :

0dB

BACK L :

0dB

REAR L :

0dB

SUB:

0dB

RETURN TO SETUP

SPEAKER CONFIG

FRONT:

SMALL

CENTER:

SMALL

SURROUNDS: SMALL

SURR BACKS: YES

SUBWOOFER: YES

RETURN TO SETUP

CHANNEL TEST

LEFT:

0dB

CENTER:

1dB

RIGHT:

0dB

REAR R :

0dB

BACK R :

0dB

BACK L :

0dB

REAR L :

0dB

SUB:

0dB

RETURN TO SETUP

SETUP MAIN MENU

INPUT CONFIG

SPEAKER CONFIG

DELAY CONFIG

CHANNEL BALANCE

CHANNEL TEST

PROLOGIC II SETUP

EXIT WITH SAVE

EXIT WITHOUT SAVE

DELAY CONFIG

FRONT L/R DIS: 10ft

CENTER DIS: 8ft

SURROUND DIS: 5ft

DELAY UNIT:

FEET

RETURN TO SETUP

INPUT CONFIG

SOURCE: VIDEO 2

INPUT: OPTICAL2

EXT 5.1: OFF

MODE: DOLBY D

RETURN TO SETUP

PROLOGIC II SETUP

CENTER WIDTH:

3

DIMENSION:

0

RETURN TO SETUP

CHANNEL BALANCE

LEFT:

0dB

CENTER:

3dB

RIGHT:

0dB

REAR R :

0dB

BACK R :

0dB

BACK L :

0dB

REAR L :

0dB

SUB:

0dB

RETURN TO SETUP

SPEAKER CONFIG

FRONT:

SMALL

CENTER:

SMALL

SURROUNDS: SMALL

SURR BACKS: YES

SUBWOOFER: YES

RETURN TO SETUP

CHANNEL TEST

LEFT:

0dB

CENTER:

1dB

RIGHT:

0dB

REAR R :

0dB

BACK R :

0dB

BACK L :

0dB

REAR L :

0dB

SUB:

0dB

RETURN TO SETUP

Advertising