Adcom GTP-860II - Manual (Page 26)

| ADCOM GTP-860 II Owner’s Manual 26 27 ADCOM GTP-860 II Owner’s Manual |
The mode option sets the default
surround mode to be used with
each source. The options are DOLBY
DIGITAL, DTS, PRO LOGIC II-C/M/P,
HALL, STEREO, and 5 CH STEREO. The
available choices in each of the fields
can be selected with the left or right
arrow buttons on the remote; confirm
the choice with the select button.
3.6 ProLogic II Setup
Dolby ProLogic II is a surround mode
that can be used to generate sur-
round sound from stereo program
material. The settings below can be
used to optimize the surround sound
listening experience when you are
using ProLogic II.
DIMENSION = This parameter is used
when listening in ProLogic II Music
mode, it changes the level balance
from front speakers to back speakers,
much the same way the fader adjust
works in some car audio systems. The
value can be varied from -3 (more
sound level from the rear)to 3(more
sound level from the front).
CENTER WIDTH = This adjustment
is used when listening to ProLogic II
music mode. It changes the amount
of sound coming out of the center
speaker. Adjust this parameter for
best over all imaging between the
front left/right and center speaker.
As the value in increased, the appa-
rant image width of the sound stage
will increase.
3.7 Other Setup
Functions
The GTP-860 II also has certain func-
tions that can be accessed by using
multiple front panel buttons pressed
simultaneously.
Reset 1: Restore factory default set-
tings and NTSC video = FM/AM button
+ video 1 button
Reset 2: Restore factory default set-
tings and Pal video = FM/AM button +
video 2
Video Mode switch (system inter-
change): Change unit between NTSC
and Pal video = FM/AM button + CD
button
Frequency interchange: Changes the
unit AM stepping frequency between
US (10kHz) and Europe (9kHz) = FM/
AM button + tape monitor button
VFD segment test: lights up all seg-
ments of the front panel display =
memory button + AM button + video
4 button. Press any key to exit test
mode.
Display software version: shows cur-
rent version of software on the front
panel display = memory button + FM
button + video 5 button. Press any
key to exit.
Program EEPROM: Programs and
restores the system memory to facto-
ry preset condition = memory button
+ CD button + surround mode button.
Press any key when programming is
complete.
SETUP MAIN MENU
INPUT CONFIG
SPEAKER CONFIG
DELAY CONFIG
CHANNEL BALANCE
CHANNEL TEST
PROLOGIC II SETUP
EXIT WITH SAVE
EXIT WITHOUT SAVE
DELAY CONFIG
FRONT L/R DIS: 10ft
CENTER DIS: 8ft
SURROUND DIS: 5ft
DELAY UNIT: FEET
RETURN TO SETUP
INPUT CONFIG
SOURCE: VIDEO 2
INPUT: OPTICAL2
EXT 5.1: OFF
MODE: DOLBY D
RETURN TO SETUP
PROLOGIC II SETUP
CENTER WIDTH: 3
DIMENSION: 0
RETURN TO SETUP
CHANNEL BALANCE
LEFT: 0dB
CENTER: 3dB
RIGHT: 0dB
REAR R : 0dB
BACK R : 0dB
BACK L : 0dB
REAR L : 0dB
SUB: 0dB
RETURN TO SETUP
SPEAKER CONFIG
FRONT: SMALL
CENTER: SMALL
SURROUNDS: SMALL
SURR BACKS: YES
SUBWOOFER: YES
RETURN TO SETUP
CHANNEL TEST
LEFT: 0dB
CENTER: 1dB
RIGHT: 0dB
REAR R : 0dB
BACK R : 0dB
BACK L : 0dB
REAR L : 0dB
SUB: 0dB
RETURN TO SETUP