Hochiki TE-TLE - Manual (Page 30)

30 Hochiki TE-TLE True Loop Emulator – User Manual
Hochiki Europe (UK) Ltd 2-3-0-416/Mar04/Iss3
A Base Sounder is added to the top third of the address position. The top third and the
bottom two-thirds of the position now operate independently.
Moving the mouse over the base sounder shows the status of the base sounder in the status
bar at the top. Note that the address is shown as 'Not Set'. When the address is correctly
set, it will be address position 128.
Now add a smoke sensor to the same address position 1.
Moving the mouse over the sensor shows the status of the sensor in the status bar. Right-
click on the sensor to see the menu items available for sensor.
Base Sounder Properties
Right-click on the base sounder to see the menu items available for the base sounder.
Select the Properties menu item to show the Properties dialogue box for the Base
Sounder.
This shows the tone and volume settings for the device. As no Control Panel has accessed
the device yet, these are all set to their default values.