Hochiki TE-TLE - Manual (Page 38)

38 Hochiki TE-TLE True Loop Emulator – User Manual
Hochiki Europe (UK) Ltd 2-3-0-416/Mar04/Iss3
you should have this password please contact Hochiki Europe (UK) Ltd
([email protected]).
Enable Data Log Functions
To enable this functionality select the File, Options menu options to display the Options
dialogue window and then select the Panel Communications tab:
Check the Enable Data Log functions checkbox and a new field will be displayed,
Password. Enter the password as supplied by Hochiki Europe (UK) Ltd or Hochiki America
Corporation. Once this has been accepted three sub-options from the Events menu option
will be enabled. These are Start Data Logging, Stop Data Logging and Save data log
As....
The Data Log is not always running; it is started and stopped by these commands on the
Events
menu. The Log can store 1,000,000 command/response pairs. After this, older
data is deleted to make room as new data is generated.