IAI America IX-INN8040 - Manual (Page 37)

31
6. Inspection/Maintenance
6.1.1 Daily Inspection
Check the following items daily before and after operating the robot.
Observe the precautions for work near the robot and for inspection/maintenance/adjustment operations
when carrying out each check.
Check location Description
Safety cage
Correct the deformation or positional shift of the cage.
Confirm that the interlock mechanism is operating properly.
Robot
Check the robot mounting bolts for looseness.
Check the exterior for abnormality, loose covers, flaws, dents, etc.
(If the robot has flaws or other abnormalities, please contact IAI.)
Check for abnormal move, vibration or noise.
Cables
Check the cables for flaws.
Check the cable mounting parts for looseness.
Emergency-stop switch Confirm that the emergency-stop switch functions properly.
6.1.2 Six-Month Inspection
Check the following items on the robot every six months.
Observe the precautions for work near the robot and for inspection/maintenance/adjustment operations
when carrying out each check.
Check location Description
Robot
Check the arm mounting sections for looseness.
(If any of the arm mounting sections is loose, tighten the fastening parts
securely.)
Ball-screw spline Add grease.
Timing belts of axes 3 and
4
• Check the belt tension for axes 3 and 4.
• Check the belts for flaws, cracks, wear, etc.
Connectors Check the connectors for looseness.
If the robot has flaws or other abnormalities, please contact IAI.
In case the grease got into your eye, immediately go to see the doctor to get an appropriate care.
After finishing the grease supply work, wash your hands carefully with water and soap to rinse the
grease off.
Caution