Aube Technologies TH303 - Manual (Page 8)

400-303-000-C
6
• Install the base onto an electrical
box.
• Place the FAN switch on Yes only if
the thermostat is connected to a
fan-forced heater. Otherwise leave
at No.
• If applicable, peel off the protective
sticker from the thermostat’s screen.
• Reinstall the faceplate on the base
and secure it in place with the screw.
• Apply power to the thermostat at the
main electrical panel.
Installing the thermostat
FAN switch
Keep air vents at top and
bottom of thermostat clean
and unobstructed at all times.
400-303-000-C EF (4.5 x 3) ENG.fm Page 6 Friday, June 19, 2009 9:28 AM