ID Innovations Classic Line Series Magnetic Stripe Readers - Manual (Page 11)

Features
11
Key Description
CTRL F10 Resets the current option to the default setting.
ALT F10 Resets all options in current category to default settings.
CTRL Escape Exit configuration, saving changes.
ALT Escape Exit configuration, without saving changes.
Note: If you experience some character loss during setup, you may press the CTRL-(Keypad Minus) key to slow
character transmission. To speed up character transmission, press the CTRL+(Keypad Plus) key.
Note: After 5 minutes of inactivity (no key presses) the Card Reader will exit setup mode and save all changes.
The following sections document all of the setup mode categories and the individual options within each category.