ID Innovations Classic Line Series Magnetic Stripe Readers - Manual (Page 9)

Features
9
Left-Control, Caps Lock, Right-Shift, and Backspace 1
- or -
Left-Control, F1, Right-Shift, and Backspace 2
Note: To configure the Value Line Keyboard Wedge reader you will need to obtain a Free copy of the Universal
Programmer software from our Website at
www.idinnovations.com . However several hot key sequences are available
to configure the more frequently used options, see page 23 for more information.
Once you release the keys, the Card Reader will produce a series of beeps, change the LED to orange and display a
message similar to the following on your display:
F1-F10=Options, Use ARROW KEYS to Toggle/Move, ESC=Exit
To ensure that you have enough space on your command line for the Card Reader options to be displayed, we
recommend that you either have your command prompt located at the root directory, or that you load an editor with a new
file. This will allow the Card Reader to use most of the characters on your computer display. For example, in Windows
load Windows Write and in OS/2 load the Notepad program.
Setup is separated into many different categories ranging from "Interface" to "Cloning". The following is a list of function
keys and the setup category for which they apply:
1 This is a generic key sequence used to configure any ID Innovations' keyboard wedge device.
2 This key sequence is used to configure ID Innovations' keyboard wedge Magnetic Stripe Readers only.