IDEC FL1E SmartRelay - Manual (Page 11)

L
ON
W
ORKS
® Communication Module User’s Manual 2-4
2.2.1 Connecting the power supply
The L
ON
W
ORKS
® Communication Module has been
designed to serve as a Slave module for the IDEC
SmartRelay controller. It must be connected to a 24 V AC/DC
supply voltage.
Please observe the relevant instructions that are found in the
product information that was included with your equipment as
well as the technical data regarding the permissible voltage
tolerances, main frequency and current consumption.
Connecting
How to connect the L ON W ORKS ® Communication Module to
the power:
DC supply AC supply
Protect the L
ON
W
ORKS
® Communication Module with a
80 mA/slow action fuse, if desired (recommended).
+-
DC24V
L
N AC24V