Avaya ip600, Zone 1 zone 2 zone 3 – Avaya IP600 User Manual

Page 14

Advertising
background image

SVS; Reviewed:
WCH/MI 6/20/02

Solution & Interoperability Test Lab Application Notes

© 2002 Avaya Inc. All Rights Reserved.

14 of 20

Gatekeeper-ext.doc

Avaya

IP600

Avaya IP Phone

X 7702

Avaya IP Phone

X 7712

CLAN

Prowler

Avaya IP SoftPhone

X 7716

To

DHCP Server

TFTP Server

DCP

X 7704

DCP

X 7705

10.9.1.4

10.9.1.3

COL-
ACT-

STA-

1 2 3 4 5 6 7 8 9101112

HS1 HS2 OK1 OK2 PS

CONSOLE

Cajun P333T

10.9.1.5

10.50.1.0

.1

.1

. 2

FXS

X 6600

Catalyst 4000 - 4604-GWY

Cisco 4224

Cisco 3660

GateKeeper 1

10

.3

0.

1.

0

.1

. 2

10.20.1.0

. 2

Cisco 1751

Gateway A

Gateway B

FXS

X 6200

Cisco 3660

Gatekeeper 2

FXS

X 6900

Cisco 1751

Gateway C

10.70.1.0

.1

. 2

10.60.1.0

. 2

.1

Gatekeeper 1

Zone 1

Zone 2

Zone 3

Figure 4: Multiple Gatekeeper Configuration


Figure 4 shows an additional Cisco Gatekeeper (Gatekeeper 2) as well as an additional Cisco
Gateway (Gateway C). Cisco’s Zone 2 and Zone 3 communicate directly to Avaya Zone 1,
where routing between Zones is determined. In other words, Zone 2 and Zone 3 communicate
with each other only through the role of the Zone 1 Gatekeeper .

Again, emphasis is placed on the unspecified Far-end Signaling Group created earlier (Signaling
Group 10 / Trunk Group 10). Its role has increased since it now must dedicate IP ports for
inbound traffic for both Zone 2 and Zone 3. In other words, there are now two Outbound
trunks (Trunk 6 and 12) with only one Inbound trunk (Trunk 10), therefore the Inbound trunk
port capacity should be increased to suit the network needs.





Advertising