Trunk group – Avaya IP600 User Manual
Page 5
SVS; Reviewed:
WCH/MI 6/20/02
Solution & Interoperability Test Lab Application Notes
© 2002 Avaya Inc. All Rights Reserved.
5 of 20
Gatekeeper-ext.doc
4.1.2. Trunk Group
In this example, Trunk Group 6 is associated with Signaling Group 6, and includes trunk
member assignment.
TRUNK GROUP
Group Number: 6
Group Type: isdn
CDR Reports: y
Group Name: Alternate IP600 Test Networ COR: 1
TN: 1
TAC: 106
Direction: two-way
Outgoing Display? y
Carrier Medium: IP
Dial Access? n
Busy Threshold: 99
Night Service:
Queue Length: 0
Service Type: tie
Auth Code? n
TestCall ITC: rest
Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 6
Codeset to Send National IEs: 6
Max Message Size to Send: 260
Charge Advice: none
Supplementary Service Protocol: a
Digit Handling (in/out):enbloc/enbloc
Trunk Hunt: cyclical
QSIG Value-Added? n
Digital Loss Group: 13
Calling Number - Delete:
Insert:
Numbering Format:
Bit Rate: 1200
Synchronization: async
Duplex: full
Disconnect Supervision - In? y
Out? n
Answer Supervision Timeout: 0
Trunk Members
Trunk member port values are initially created by assigning the term “ip” in the Port column.
The system will then assign the T000xx value to the port as shown below.
TRUNK GROUP
Administered Members (min/max):
1/7
GROUP MEMBER ASSIGNMENTS
Total Administered Members:
7
Port
Code Sfx Name
Night
Sig Grp
1: T00049
6
2: T00050
6
3: T00051
6
4: T00052
6
5: T00053
6
6: T00054
6
7: T00055
6