Receive/check in inventory data, Receive inventory data, Receive/check in inventory data 181 – IntelliTrack Check In/Out User Manual
Page 209: Receive inventory data 181
Chapter 9
Issuing and Receiving Items
181
7.
Enter the quantity received into the put-away location and press TAB.
8.
Enter any (optional) comments in the Comments field. Press TAB.
9.
If you are using Cost Tracking and have enabled cost tracking for this
item, you must enter the unit cost for the item in the Cost field.
10.
After entering item data, you have two options:
Repeat steps 4-9 to add another item to the current order.
Click the Do It button to process the current order and move the cursor
to the User ID field; repeat steps 2-7 to enter a new order.
11.
Click the Close button to process the data and return to the Check In-
Out main menu.
Receive/Check In Inventory Data
To add inventory data to the database during the receiving process:
1.
Create the item.
2.
Assign site, location, and quantity data to the item.
3.
Add item data.
Receive
Inventory Data
To start using Check In-Out if part numbers (consumables only) are
already bar coded or to relocate inventory, enter item data using the
Receipts process. The Receipts process loads the Item#, site, location,
and quantity into the database.
1.
Select the Manage Command Tab > Stock Command Set > Receipts
option from the ribbon.
2.
The Stock Receipts form appears.
2283.book Page 181 Thursday, July 9, 2009 11:26 AM