Inter-M CD-610U - Manual (Page 8)

CD/MP3/WMA/WAV PLAYER
6
CD-610U
7. EnCODER SWItCH / OK BUttOn
Rotates this ENCODER switch to perform skip, folder change or search function after select the Skip ( I◀◀▶▶I),
Folder ( ) or Search ( ◀◀ ▶▶) mode. In menu mode, turning this ENCODER switch can changes the
menu and pushing this button can change the setting.
Changes the menu and pushing this button can change the setting.
8. AUtO PLAy SWItCH
By setting this switch on, the preset source of a memory disc, CD or USB is automatically played when
the unit is turned on.
Playback starts from the first track of the preset source.
9. POWER SWItCH
Use this switch to turn the power on or off.
10. PLAy MODE
Use this button to stop the playback after 1 track is played.
When the PLAY mode button is pressed during the playback, playback is stopped after the playback of
the track is end.
11. REPEAt BUttOn
Use this button to select repeat mode, REPEAT 1, REPEAT GROUP, or REPEAT ALL.
12. PROGRAM UPDAtE BUttOn
Only use when system program need to be updated.
13. DISPLAy BUttOn
Use this button to select time mode, playback time or remaining time.
14. DISPLAy WInDOW
The display shows the current status of the unit or the current menu setting.
15. PLAy / PAUSE BUttOn
Use this button to play or pause.
16. StOP BUttOn
Use this button to stop the playback.
17. CUE BUttOn
When the CUE is on and a track is selected, the point where sound begins on that track is located to and
the unit enters into pause mode.
When the play button is pressed, playback begins at exactly that point.
18. USB PORt
Use this terminal to mount USB memory. The unit supports USB1.1
When CD LED is on, USB will not be played.
When USB LED is on, CD will not be played.