ION Audio Discover Karaoke - Manual (Page 2)

2
BOX CONTENTS
• DISCOVER KARAOKE
• 2 microphones
• 1/8" TRS cable
• Power adapter
• USB cable
• iPad stand
• Quickstart Guide
• Safety Instructions & Warranty Information Booklet
CONNECTION DIAGRAM
FEATURES
1.
POWER IN – Connect the included power
adapter to this input, then connect the
adapter to a power source.
2. POWER SWITCH – Turns DISCOVER
KARAOKE on or off.
3. USB PORT – Use the included USB cable
to connect this port to a free USB port on
your computer. Be sure to set the INPUT
SELECTOR to "USB."
4. iPad JACK – Use the included 1/8" TRS
cable to connect this jack to an iPad. Be
sure to set the INPUT SELECTOR to
"PAD."
5. INPUT SELECTOR – Set this switch to the
device you want to use – "PAD" for an
iPad, or "USB" for a computer.
6. MAIN OUT – If you have other speakers you would like to use instead of DISCOVER KARAOKE's built-in
speaker, use a standard stereo RCA cable (not included) to connect this output to your speaker(s).
7. SPEAKER – This is DISCOVER KARAOKE's built-in speaker.
8. MIC INPUT – Connect the included microphone to this input. You can use up to two microphones at a time.
Adjust the volume with the MIC VOLUME knobs and MASTER VOLUME knob. If no microphone is connected
to an input, turn its corresponding MIC VOLUME knob all the way down.
9. MIC VOLUME – Use this knob to control the volume of its corresponding MIC INPUT. If no microphone is
connected to a corresponding input, turn its volume all the way down.
10. MASTER VOLUME – Use this knob to control the volume of the entire mix (the song plus both microphones).
11. ECHO – Use this knob to add or remove an echo effect to the mix. Echo can give your mix a bigger sound
(simulating the reverb heard in a large concert).
iPad* or Computer
7
8 8
9 9 10
11
1
2 3 4
5
6
* iPad is a trademark of Apple,
Inc., registered in the U.S.A. and
other countries.
iPad and computer not included.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.