Janam XG105 - Manual (Page 8)

Janam XG Series Quick Start Guide
D. CALIBRATING THE SCREEN
The first time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen
instructions using the stylus to tap the exact center of each target.
Note: If your XG Series device came pre-loaded with a custom software application, the Welcome Utility may not appear.
E. LCD BACKLIGHT ADJUSTMENT
To adjust LCD backlight, tap the following sequence: Start > Settings > Control Panel > Display > Backlight > Advanced,
then adjust on-screen slider with stylus or use the navigation arrow keys.
Getting Started
7