King Electric F802GFCI Electronic Programmable - Manual

1
SAVE THESE INSTRUCTIONS
INSTALLATION AND MAINTENANCE
F802GFCI
Thermostat
DANGER
! !
ELECTRIC SHOCK OR FIRE HAZARD
READ ALL WIRE SIZING, VOLTAGE REQUIREMENTS AND
SAFETY DATA TO AVOID PROPERTY DAMAGE AND
WARNING
! !
KING ELECTRIC MFG CO · 9131 10TH AVENUE SOUTH · SEATTLE, WA 98108 · PH:206 762 0400 · FAX: 206 763 7738 · www.king-electric.com
READ CAREFULLY - These instructions will help prevent difficulties that might arise during thermostat
installation. Studying the instructions first may save considerable time and money later. Observing the following
procedures will keep installation time to a minimum. Save these instructions for future use.
FUNCTIONS AND FEATURES
Specifications:
Thermostat is suitable for floor heating systems,
Power Supply AC 120/ 240V，50/60Hz
Maximum Load 15A, resistive
Maximum Power 1800W at 120VAC; 3600W at
240VAC
GFI Class A （5 milliamp trip）
Display Range 32℉-99℉（0℃-37℃）
Setting Range 41℉-99℉（5℃-37℃）Accuracy 1
(0.5℃）
Storage Temp. 32℉-120℉（0℃-49℃)
cETLus listing.
Warning: Turn OFF the power at the circuit breaker
before Installing. Installation should be performed by a
qualified electrician.
Refer to thermostat and heater load specifications
before installation of the thermostat to see if it can
handle the amp load. The maximum this thermostat can
run is 3600 Watts at 240 Volts, 1800 Watts at 120 Volts.
Install unit in a grounded metal or plastic wall junction
box, indoors 4 ½’ to 5’ above the floor. Avoid any area
where it can come in contact with external sources of
heat and cold. This includes plumbing pipes, direct
sunlight, a T.V. set, lamps, and drafts from a door or
window, as this may cause inaccurate temperature
readings. The most convenient place is above the light
switch. Not for Outdoor use.
 Dual Voltage (120vac and 240vac)
 7 day programmable settings
 4 Preset Heating Schedules
 Floor and Ambient air sensing
 Blue Backlit Display
 Built-in GFCI and Floor Sensor Included
INSTALLATION INSTRUCTIONS
This Thermostat has been designed for floor heating applications. The built in Ground
Fault Circuit Interrupt (GFCI) provides worry-free operation and includes the floor
sensor. Required for Floor Heat applications
Breaker
Thermostat
Floor
Heater
Cable