Apollo CNX80 - Manual (Page 43)

Apollo CNX80 Pilot’s Guide
39
Configuration
The Configuration page lets you customize many of the settings and
unit measurements for your installation or local needs.
1. Press FN and then the CNFG key to reach the Configuration func-
tions.
2. Turn the Large knob to highlight the value you want to change. The
green arrow on the right side of the display indicates the direction to
turn the Large knob to view more choices.
3. Press the CRSR knob in to start editing.
4. Turn the Small knob to change the value.
5. Press the CRSR knob in again or press the Menu/Enter key to save
the value.
Sys
te
m
CNX80 Pilot Guide 560-0984-00C Draft1.book Page 39 Tuesday, September 2, 2003 10:36 AM