Aiwa TV-F2000u - Manual (Page 11)

ENGLISH
Connecting a VCR or other equipment
2
Remove the antenna cable from the TV and connect it to the antenna input connector on the VCR.
Connect the optional antenna cable to the antenna output connector on the VCR and to the ANTENNA
connector on the TV.
You can connect the TV and the VCR with the optional audio/video cable.
To watch video
Refer to “Watching a video or other equipment” on page 19.
Tips
• If the VCR is a monaural type, connect one of the audio plugs only to the AUDIO L (MONO) jack.
• If the VCR has a S-video output jack, you can connect the optional S-video cable to the S-video output jack on the VCR and to the
VIDEO 1 INPUT S-VIDEO jack on the TV. In this case, you do not need to connect the cable to the VIDEO jack.
Note
For details on how to connect the VCR to the TV, consult the individual owner’s manual for the VCR.
1
To antenna input
connector
1
75-ohm coaxial
cable
(not supplied)
2
To antenna output
connector
To audio/video
output jacks
Audio/video
cable
(not supplied)
To VIDEO 1 INPUT
VIDEO jack
To VIDEO 1 INPUT
AUDIO L (MONO)/R jacks
Red
Yellow
White
6
TV-F2000
To ANTENNA
conector
CONTINUE