Aiwa TV-F2000u - Manual (Page 15)

ENGLISH
Watching a TV program
BASIC OPERATIONS
1
2
3
Setting the sleep timer
Press SLEEP repeatedly to select the number of
minutes after which to turn off.
The minutes change up to 120 minutes as follows.
After the set amount of time has elapsed, the TV turns to the
standby mode.
To check the remaining sleep time
Press SLEEP once. The remaining time appears on the
screen.
To cancel the sleep timer
Press SLEEP repeatedly until “SLEEP OFF” appears.
Note
The remaining time appears automatically 5 minutes and 1
minute before the TV turns off.
For example, 5 minutes before turning off, “SLEEP 5” appears.
POWER
+100
CHANNEL N / M
SLEEP
Number buttons
MUTE
VOLUME +/–
PHONES \ jack POWER
SLEEP 30
VOLUME +/–
CHANNEL
N / M
OFF 15 30 60 90 120
Press POWER on the remote control to turn on
the TV.
If POWER on the TV is not pressed, you cannot operate
the TV even by pressing POWER on the remote control.
Press CHANNEL N or M repeatedly or the
number buttons to select the channel number.
When you use the number buttons, press the button as
follows:
Example
To select the channel 7, press 0 then 7.
To select the channel 77, press 7 then 7.
To select the channel 107, press +100, 0 then 7.
Press VOLUME + or – to adjust the volume.
To turn off the TV
Press POWER on the remote control.
The
6 STANDBY indicator on the TV lights.
You can turn the TV on or set the TV to the standby mode
by pressing POWER on the remote control.
Press POWER on the TV to turn the main power off.
To mute the volume
Press MUTE. “MUTE” appears for a few seconds.
To restore the volume, press MUTE or VOLUME + or –.
To recall a previous channel
Press PREV. CH to switch back and forth between the
current channel and the previous one.
Tip
To listen through the headphones, insert the headphones (not
supplied) with a stereo mini plug into the PHONES
\ jack on
the front. The sound from the TV speaker is muted.
Notes
• The TV automatically turns to the standby mode
approximately 15 minutes after a television station has
stopped broadcasting.
• In standby mode, CHANNEL N or M on the TV also can
turn on the power.
10
PREV.CH