LevelOne FCS-4101 - Manual (Page 34)

Network Camera User’s Manual
34/56
General Setting
1. “Color mode”
Select use color or monochrome video display.
2. “Video orientation”
The orientation of video
(1) “Flip”
Vertically rotate the video.
(2) “Mirror”
Horizontally rotates the video.
3. “Environment”
The orientation of video
(1) “indoor”
This option is usually selected when the Network Camera is placed
in indoor environments.
(2) “outdoor”
This option is usually selected when the Network Camera is placed
in outdoor environments.
4. “Power freq.”
Select 50 Hz or 60Hz power line frequency.
※ The fluorescent light will flash according to the power line frequency that
depends on local utility. Change the frequency setting to eliminate uncomfortable
flash image when the light source is only fluorescent light.
Video Setting
1. “Contrast”
Adjust the image contrast level, which ranges from -5 to +5. The default
value is set to 0.
2. “Brightness”
Adjust the image brightness level, which ranges from -5 to +5. The
default value is set to 0.
3. “Saturation”
Adjust the image saturation level, which ranges from -5 to +5. The
default value is set to 0.
4. “Sharpness”
Adjust the image sharpness level, which ranges from -5 to +5. The
default value is set to 0.
5. “EV” Exposure value represent the expected target value of the luminance of
the weighting result of AE windows in the image and its tolerance as offset.
6. “Gain” In the slide bar of Gain, there are also two sliders, which represent the
limitations to control the maximum gain value and the minimum one, respectively.
Normally, the minimum value is to 1x for better quality.
Wide Dynamic Range
Enable Wide Dynamic Range auto in different level to improve the exposure
when both bright and dark areas simultaneously in the field of view of the camera.
The default is off.
Infrared Led Setting
1. “Infrared LED Control”
IR led for Day and Night (Option). User can turn on/off
the built-in IR led. This function is very useful under low illumination environment.
(1) “Auto”
Select IR sensitivity from 0 to 4.
(2) “Manual”
Turn on/off the IR led manually.
- “Turn on”
Turn on led
-
“Turn off”
Turn off led
2. “Low lux mode” The video quality will be improved when the camera is in low
lux environment.
(1) “Disable dark mode”
Disable low lux mode.
(2) “Enable dark mode”
Enable low lux mode.