LevelOne FCS-4101 - Manual (Page 49)

Network Camera User’s Manual
49/56
suggested to upload a settings backup file.
5
. “Upgrade firmware”
Select the firmware file and click upgrade button. Please be
aware that you should not turn off the power during updating the firmware and wait for
finish message.
Warning:
The upgrade firmware procedure cannot be interrupted. If the power
and/or network connection are broken during the procedure, it might possibly
cause serious damage to the Network Camera.
Note: When upgrade firmware please wait for 90~210 seconds, and then you can
connect to Network Camera again. The system will restart and require the
installer program to set up the network again.