LevelOne WCS-2010 - Manual (Page 42)

36
“Data encryption” Checking the box to enable the data encryption. By default it is
disabled.
“Auth. Mode” Choosing one of the following modes, (Open is the default setting)
z “Auto” – The selection will apply both Shared and Open mode authentication
method. this is the most strict mode of all.
z “Shared” – allows communication only with other devices with identical WEP
settings.
z “Open” – communicates the key across the network.
“Key length” The administrator can select the key length among 64 or 128 bits. 64bits is
the default setting.
“Key format” Hexadecimal or ASCII. “HEX” is the default setting.
z “HEX” digits consist of the numbers 0~9 and the letters A-F.
z “ASCII” is a code for representing English letters as numbers from 0-127 except “, <,
> and space characters that are reserved.
“Network Key” Entering a key in either hexadecimal or ASCII format. When selecting
different key length, acceptable input length is listed as following:
64 bits key length: 10 Hex digits or 5 characters.
128 bites key length: 26 Hex digits or 13 characters.
Note: When 22(“), 3C(<) or 3E(>) are input in network key, the key format can’t be changed
to ASCII format.
Mail & FTP
SMTP
“SMTP (mail) server 1” The domain name or IP address of the external email server.
“Recipient email address 1” The email address of the recipients for snapshots or log file.
Multiple recipients must be separated by semicolons, ‘;’.
“SMTP account name 1” Some SMTP server requires an account name for logging in.
Refer to your SMTP administrator for detailed information.
“SMTP password 1” The password for the SMTP server account.
“SMTP (mail) server 2” The domain name or IP address of another email server once the
previous server is unreachable.
“Recipient email address 2” The email addresses of the recipients for the backup server.
“SMTP account name 2” The account login name for the second SMTP server.
“SMTP password 2” The password for the second SMTP account name.