Acura 2009 RL - Manual (Page 473)

Install the new bulb in the socket
by pushing it straight in the socket
until it bottoms.
Reinstall the socket into the light
assembly. Turn it clockwise to
lock it in place.
Test the lights to make sure the
new bulb is working.
Tighten the mounting nut securely,
and reinstall the maintenance lid.
When reinstalling the taillight
assembly, align and pop the snap
fasteners in place. Tighten the two
mounting bolts and reinstall the
trim in place.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise. Open the trunk.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Remove the light assembly cover
by pulling its outside edge.
9.
8.
10.
11.
12.
1.
2.
3.
4.
CONTINUED
Lights
Replacing a Back-up Light Bulb
Ma
int
e
na
nce
467
COVERS
BULB
SOCKET