Acura 2009 RL - Manual (Page 71)

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. This indicator has three functions:
It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.
It flashes when VSA is active (see
page
).
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. For more information, see
page
.
It comes on along with the VSA
system indicator if there is a
problem with the VSA system.
You will also see a ‘‘CHECK VSA
SYSTEM’’ message on the multi-
information display (see page
).
If it comes on and stays on at any
other time, or it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. You
will also see a ‘‘CHECK VSA
SYSTEM’’ message on the multi-
information display (see page
).
Take your vehicle to a dealer to have
it checked. Without VSA, your
vehicle still has normal driving ability,
but will not have VSA traction and
stability enhancement. For more
information, see page
.
This indicator comes on when you
turn on the fog lights. For more
information, see page
.
This indicator comes on with the
high beam headlights. For more
information, see page
.
This indicator also comes on with
reduced brightness when the
daytime running lights (DRL) are on
(see page
).
This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button on the
steering wheel (see page
).
1.
2.
3.
78
78
142
140
142
427
316
427
427
On models without adaptive cruise
control (ACC)
Instrument Panel Indicators
Vehicle Stability Assist
(VSA) System Indicator VSA Activation Indicator Fog Light Indicator
High Beam Indicator
Cruise Main Indicator
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
65