LevelOne GVT-4001 - Manual (Page 13)

11
4.
Specification
Fast Ethernet Module
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x Flow Control and Back pressure
Connector
Fiber: Duplex ST/SC
RJ-45 Socket: CAT-3/5 (10/100Mbps)
Twisted Pair cable, Auto MDI/MDI-X, Auto-Negotiation
Switch
architecture
Store and Forward
Fiber
parameters
Fiber Core: Multi-Mode (62.5/125um, 50/125um)
Single-Mode (8/125um, 9/125um)
Wavelength: 1310nm(Multi-mode)
1310nm(Single-mode)
Fiber Distance: Multi-Mode Fiber 2KM
Single-Mode Fiber (30 KM)
Transparent
packet
64 to 1600 Bytes for Non-VLAN Ethernet packet
Link Lost
Forward
UTP
ÎFiber: If UTP port link down, then converter will forced
fiber to link down.
Fiber
Î UTP: If Fiber port link down, the media converter will
force UTP port to link down.
DIP Switch
DIP Switch 1: UTP Auto-Nego / 100Mbps Full Duplex mode
DIP Switch 2: Fiber Full/Half Duplex
DIP Switch 3: LLF (Link Lose Forwarding) Disable/Enable
DIP Switch 4: Switch Converter / Pure converter mode
LED
Power, UTP (100Mbps, LK/Act, FDX/COL)
Fiber (LK/Act, FDX/COL)
Power DC9V / 0.7A
Dimension 119mm x 85mm x 26mm
EMI & safety CE, FCC Class A