LevelOne GVT-4001 - Manual (Page 9)

7
2.4.
DIP-switch
The DIP-switch is used to configure operation mode for LLF (Link
Lost Forwarding) and operation mode for UTP/Fiber port. The
default value of DIPswitch is OFF.
Fast Ethernet Module
No Status Description
ON UTP 100Mbps Full Duplex mode
1
OFF UTP Auto-Nego
ON Fiber in Half Duplex
2
OFF Fiber in Full Duplex
ON LLF Enable
3
OFF LLF Disable
ON Pure converter mode
4
OFF Switch Converter mode
Gigabit Ethernet Module
No Status Description
ON Fiber in 1000Mbps Full Duplex
1
OFF Fiber Auto-Negotiation
ON UTP LLF Enable
2
OFF UTP LLF Disable
ON Fiber LLF Enable
3
OFF Fiber LLF Disable