LevelOne KVM-0811 - Manual (Page 19)

16
6. On Screen Display
1. OSD menu can be popped up in powered on PC port or non-powered on PC port or
empty PC port. The resolution of OSD menu is fixed to 1024X768 for non-powered on PC
port or empty PC port.
2. When you pop up the OSD menu window go through the hot key, you will see the
following small window on your monitor.
A. The 1ST line bar is Bank no.
B. The 2nd block is your PC system
name list. You will find the system
number list from 01 to 04 ( if the current
box is 4 port) or from 01 to 8 (if the
current box no. is 8 port)or from 01 to
16 (if the current box no. is 16 port).
You can define your PC name in
maximum 8 characters. The factory
default of 16 port KVM switch PC name
is from “SYSTEM 01”, “SYSTEM
02” ,…, “SYSTEM 16” and 8 port KVM
switch is from “SYSTEM 01”,
“SYSTEM 02”,…, “SYSTEM 08”.
Besides, the sun symbol “ ☼ “ near to
the PC name represents the PC
system is powered on.
To use up arrow key “ “ or down arrow key “ “ to select port for destination PC name.
After you have selected the PC port already, you can press the ENTER Key to switch the
PC port you want immediately
To use “ PgUp “ key or “ PgDn” key for selecting previous or next Bank no. (or Box No.)
1. SYSTEM 09 2. SYSTEM 10
BANK : 1
3. SYSTEM 01 4. ☼SYSTEM 02
5. ☼ SYSTEM 03 6. ☼ SYSTEM 04
7. ☼ SYSTEM 05 8. SYSTEM 06
9. SYSTEM 07 10.☼ SYSTEM 08
11.☼ SYSTEM 11 12.☼ SYSTEM 12
13. SYSTEM 13 14.☼ SYSTEM 14
15.☼ SYSTEM 15 16. SYSTEM 16
OSD : 1 0 SEC. CHANGE PASSWORD
SCAN: 1 0 SEC. CONSOLE ON /OFF
ESC : QUIT ENTER :COMPLETE
TAB : NEXT INSERT :EDIT
/ : SELECT PORT
PgDn/PgUp: BANK SELECT