LevelOne VOI-7011 - Manual (Page 51)

45
VLAN Settings
This function provides packets control over LAN, it must work
with Ethernet switch supported. 802.1Q-compliant can be
configured to transmit tagged or untagged frames. A tag field
containing VLAN (and/or 802.1p priority) information can be
inserted into an Ethernet frame.
VLAN Packets If you enable VLAN Packets and set the
VID, User Priority, and CFI, then all the
incoming packets will be checked with the
IP Address and the VID.
VID
(802.1Q/TAG) VLAN identifier (VID) between one and
4,094 into each frame. A VID must be
assigned for each VLAN.