LiftMaster EL2000 Telephone Entry for Commercial Applications and Gated Communities - Manual (Page 2)

Enter Last Name 1
Enter Display Info 2
NOTE: The unit uses Display
Info for transactions when
the Entry Code or Credential
Code is used.
7. Click the ACCESS DETAILS Tab 6. Click the NEW TENANT ICON
Enter an Entry Code (optional) 1
Click on Select and create a new
Credential (optional) 2
NOTE: A credential is a generic term when
referring to a transmitter or swipe card.
11
1
2
2
8. Click the AUTO CONFIGURATION ICON
OK
The Custom Configuration screen will open
A pop-up window will inform you that the Connect Set was
sucessfully tested.
NOTE: If “Test It” button fails, try one of the following:
If the problem persists, please call technical support.
If a window appears informing you to close all applications,
make sure to close other applications and click
Wait for Versa XS to
identify modems 1
4
5
Check the “Use This Connect Set for Unit”
check box 4
1. Be sure your modem is turned on.
2. Check the appropriate Connection Mode (Direct or Modem) type
confirms with the selected COM port (see you computer’s COM
settings).
3. Close any other application using the COM port.
4. Close any other applications.
9. Click the TRANSFER DATA ICON
Check Configuration and Tenant Info in the Send Data to Unit frame 1
1
2
1
2
3
Select a Connect
Set from the
“Connect Set” list 2
Click OK 3
Click “Test It”
then 5
click
Click START 2
NOTE: If a mismatch message/warning appears click OK.