LiftMaster EL2000 Telephone Entry for Commercial Applications and Gated Communities - Manual (Page 3)

2. Click the Unit Configuration ICON Select the DEVICES Tab
1. Click the NEW UNIT ICON
Enter Unit Name and select
the correct Unit Type 1
Enter Country, State/Prov., City
and Phone Number 2
Enter Phone Number
to dial into unit 3
Click OK 4
3. Select the RELAYS Tab 4. Click the DOORS Tab
11
2
5
3
6
4
Click on the
“Device Configuration
Wizard” button 1
Choose “RF Receiver”
for “J407” 2
Rename “Device 1” to
“Back Door Reader” 5
Rename “Device 3” to
“Gate Receiver” 6
Choose “Wiegand Device”
for “J400” 3
Click OK 4
1
2
Set Relay Names, Relay Types and
Activation Times: 1
Set Relay Groups: 2
Relay # Relay Name Relay Type Relay Activation Time
1 Front Strike Strike 10 Seconds
2 Security Light Control 60 Seconds
3 Back Strike Strike 10 Seconds
4 Gate Strike 2 Seconds
Relay Group Name
Front Door Group
Back Door Group
Gate Group
Front Strike
X X
X
X
Security Light Back Strike Gate
Rename “Door 1” to “Front Door”
1
Select “Front Door Group”
from the drop-down menu
2
1
2
Rename “Door 2” to “Back Door” and
select “Back Door Reader” for the Device
3
Select “Back Door Group”
from the drop-down menu
4
Rename “Door 3” to “Gate” and
select “Back Door Reader” for the Device
5
Select “Gate Group”
from the drop-down menu
6
Click SAVE 7
3
4
5
6
7
Quick Start Guide
For Multi-Family or single-Family (With Directory Codes)
Versa XS
2
3
4
Disabled Disabled
Disabled Disabled
This Quick Start is intended to highlight a typical Multi-Tenant Complex. These instructions are
not intended to be comprehensive. Each application is unique, it is the responsibility of the
purchasers, designer, installer and end user to ensure that the total control access system is safe
for its intended use. Please refer to the manuals and/or qualified technician for further
information.
NOTE: The default password is “Manager.”
®
EL MODEL