Audio Authority Series 1500 - Manual (Page 14)

14 Audio Authority ® Series 1500 Installer’s Reference Guide Audio Authority ® Series 1500 Installer’s Reference Guide 15
Definitions
BLOWER MOTOR DELAY If enabled, the period between disengagement of blower and microphone audio un-
mute.
POWER SAVE DELAY If enabled, the length of time the system must be idle before entering Power Save
(LCD sleep).
SUPERVISOR TELLER If enabled, allows one Counter Station to monitor others.
LANE MIRROR DISABLE OFF=idle Lane Stations display their own camera output. ON=idle Lane Stations DO
NOT display their own camera output.
TRAFFIC SENSOR TONE Press a key to select a unique ringtone for all traffic sensor events. 0=no ringtone,
1=use Lane Station Ringtone Override setting.
BACKGRND THRESHOLD Adjustment for level of background audio rejected by Counter Station microphone.
0=no rejection.
SINGLE LANE Configure lane without live audio. Useful when lanes are in use or audio is not
required for adjustments.
AUTO-SELECT 1 LANE Configure lane with live audio. Useful for adjusting inbound and outbound audio
levels.
INBOUND VOLUME LVL Inbound volume level adjustment.
OUTBOUND VOLUME LVL Outbound volume level adjustment.
OPEN LOOP GAIN Adjustment for adapting to different acoustic environments. Lower this setting for
Lane Station acoustical environments with too much microphone and speaker
coupling. Increase this setting to hear more of the customer while operator is talking.
HANDSET MIC LVL Inbound handset volume level adjustment.
HANDSET SPKR LVL Outbound handset volume level adjustment.
RINGTONE OVERRIDE Press a key to select a unique ringtone for the selected Lane Station(s). 1=no
override (plays the ringtone set by each Counter Station). All other keys represent
unique ring tones which override any Counter Station settings.
HALF DUPLEX ONLY Enables ‘push-to-talk’ operation.
PGM AUDIO ABATE ON=Program Audio heard when lane is idle or on hold; OFF=Program Audio heard
only when lane is on hold.
RELAY OPERATION Allows configuration of Lane Station relay contacts (Model 1520 terminal block pos.
9 & 10). The contacts can be set to close using the HOLD key, or while the lane is
selected. (See Operator Card l for HOLD key operation details.)
KEY ASSIGNMENT This menu enables lane selection keys to be redefined in any configuration desired.
First select the lane number to be assigned using the VOLUME keys. Then touch the
key to be assigned to that lane. If the desired key is already assigned, touch it twice.
For 20 lane systems use “Page Mode”. Page Mode allows the user to flip between
two “pages” of keys. The first page contains lane 1-10, the second 11-20. To enter or
exit Page Mode, touch the HOLD key while in KEY ASSIGNMENT.
WRITE TO MEM. CARD System settings are saved to hub memory card.
READ FROM MEM. CARD System settings are restored from hub memory card.
FIRMWARE UPGRADE This menu allows the firmware of system components to be upgraded.