Installing a 1509 hub, 4 audio authority – Audio Authority Series 1500 User Manual

Page 5

Advertising
background image

4 Audio Authority

®

Series 1500 Installer’s Reference Guide

Audio Authority

®

Series 1500 Installer’s Reference Guide 5

LEVEL

COUNTER

STATION 1

COUNTER

STATION 2

LANE

STATION 1

LANE

STATION 2

LANE

STATION 3

LANE

STATION 4

12 VOLT

DC POWER

MEMORY

DIAGNOSTICS

PROGRAM AUDIO

Installing a 1509 Hub

1. Position and install the Hub under the

counter or in a secure indoor location such
as a telephone closet. Ground the hub to
a nearby electrical device cover using the
green grounding wire attached to the hub.

2. Run a length of Cat 5 cable from each

counter and lane station to the hub.
Observe the wiring guide on page 2,
and use a cable tester to verify the
terminations.

3. Connect audio source to Program Audio

jacks if desired, and adjust volume level
during system testing.

Illustration: Shown is Model 1509 Audio
Intercom Hub. Minimum connections for Audio/
Video Hubs are shown. For more information
on Memory and Diagnostics functionality, see
page 9.

GROUND WIRE

1 AMP POWER SUPPLY
(MODEL 571-013)

CAT 5 CABLE TO COUNTER STATION #1

CAT 5 CABLE TO LANE STATION #1

POWER CONNECTION

SYSTEM CARD (MODEL 1517)
SEE PAGE 10 FOR INSTRUCTIONS

FOUR-UNIT COUNTER STATION
CARD (MODEL 1515)

FOUR-UNIT LANE STATION
CARD (MODEL 1516)

CAT 5 CABLE TO

COUNTER STATION #1

CAT 5 CABLE TO

LANE STATION #1

1 AMP POWER SUPPLY

(MODEL 571-013)

Installing a 1510 Hub (1511, 1512, 1513 are similar)

1. Position and install the Hub under the counter or in a secure indoor location such as a telephone closet. Ground the

hub to a nearby electrical device cover using the green grounding wire attached to the hub.

2. If the installation requires additional capacity, install a Counter Card or Lane Card(s) as needed (see page 11).
3. Run a length of Cat 5 cable from each counter and lane station to the hub. Observe the wiring guide on page 2, and

use a cable tester to verify the terminations.

4. Connect other equipment as needed (see page 11).

GROUND WIRE TO ELECTRICAL

DEVICE COVER

Illustration: Model 1510, the minimum capacity AV Hub configuration. Minimum connections for Audio/Video Hubs are
shown. For more configurations, system card functions, and other connections, see page 11.

Advertising